Fieldpiece - The ATC1 K-type pipe clamp thermocouple is used to take temperatures of pipes or any other cylindrical surface within its 3/8" to 1-3/8" jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or subcooling measurements. Use the ATC1 for most A/C units. The ATC1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.
The sensor is virtually isolated from ambient conditions, allowing the thermocouple to read the true pipe temperature for as long as it is attached. The sensor's large surface area and increased clamping force help the sensor reach the correct temperature within 30 seconds. Because the jaw is designed for HVAC/R, its clamping ability allows users to measure temperatures of pipes that are fixed, at any angle, to walls or other surfaces. Calibration and atmosphere will affect maximum useful temperature in applications. The wire insulation and clamp material are designed to withstand a maximum continuous use at 257°F (125°C).
ATC1 jaw range: 3/8" to 1-3/8" pipe diameter (outside diameter)
Accuracy: +/- 4ºF (2°C) ; ±1°F (0.5°C) after field calibration, 32 to 176ºF (0 to 80°C)
Perfect for superheat and subcooling measurements - Temperature range: -50° to 257°F
For Use With
Works with Fieldpiece’s temperature accessory heads, superheat accessory heads, or other temperature instruments that use K-type thermocouples
Equipment Part List
*Valid through August 31, 2018. Excludes special pricing. Offer cannot be combined with other offers or programs. While supplies last. No rainchecks allowed. Management reserves the right to modify or end this promotion at anytime. Call your local branch for details.